Packing Seals (Medium High Pressure)
These are seals for hydraulics with medium-high pressures composed in most cases of an elastomer part and a reinforced cotton one.
Suitable for dynamic applications with reciprocating motion, this seals can be mounted on both rods and pistons.
![](https://dichta.com/wp-content/uploads/2022/04/S8.jpg)
S8
Rod seal manufactured as an integral element, vulcanising a NBR sealing element on a reinforced cotton fabric base. Compact seal, even for standard housings according to ISO 5597.
![](https://dichta.com/wp-content/uploads/2022/04/G10.jpg)
G10
Rod seal manufactured as an integral element by vulcanising together cotton fabric and NBR. Excellent resistance to wear and low friction.
![](https://dichta.com/wp-content/uploads/2022/04/G17.jpg)
G17
Collar for rotating movements composed by a seal ring in NBR and a supporting ring in NBR + cotton fabric.
![](https://dichta.com/wp-content/uploads/2022/04/G18.jpg)
G18
Two parts rod seal: lip sealing part in fabric reinforced rubber and support part moulded in a special rigid fabric. Suitable in cases where hydraulic equipment is subjected to severe vibrations, shock and high pressure.
![](https://dichta.com/wp-content/uploads/2022/04/G19.jpg)
G19
Collar for rotating movements composed by a seal ring in NBR+ cotton fabric, a supporting ring in NBR and a back-up ring in POM.
![](https://dichta.com/wp-content/uploads/2022/04/JWT.jpg)
JWT
Piston seal composed by a U-ring made in NBR + fabric Hard material, and a head ring in nylon type.